How to assemble the Twin Bar Wire Mesh Fence?

Do you know how to assemble the Twin Bar Wire Mesh Fence?

Since the top of the Twin Bar Wire Mesh Fence  adopts a curved shape, the bent fence net can be used in the whole greening construction, which can play the characteristics of beautiful appearance, reinforcement and not easy to be damaged. For different types of landforms and lawn vegetation, etc., different types of bilateral fences should also be adopted. The height range should be controlled between 80cm-120cm, and the direct buried depth of the entire column should also be controlled within a certain range.

Installation method of double  wire fence

1. Determine the distance from the pit to the pit:

According to the length from the middle of the fence to the column, if the size of the fence is 1.8×3 meters, then the distance from the pit to the pit is 3 meters. The midpoint of all pits can be marked with a tape measure.

2. Digging:

Generally speaking, if it is not a very high or specially required guardrail, we generally pre-bury 30 cm, and can dig a 30X25X25cm pit.

3.Place columns, fill soil or concrete:

In order to prevent the column from skewing, the column can be supported by a fixed object. At this time, the position of the column to the column can be measured again, and if it is not right, the column can be fine-tuned. If it is to make the guardrail stronger, you can fill the pit with concrete. When the concrete is dry, install the mesh.

Flange column screw installation; also reflected in some installation details. The Twin Bar Wire Mesh Fence adopts a card connection method, that is, the net pieces are combined with each other. Then it is necessary to install the correct flange column at the connection point. Pay attention to the proper installation strength. Usually, it is required that the fence cannot be pulled out at will and then re-corrected during the installation of the fence. It must be completed at one time. This is very important. To a certain extent, the hammering strength must be moderate and just right. While tamping the foundation, make necessary column adjustments to ensure the correct depth installation.

The above content is the description of the Twin Bar Wire Mesh Fence that I have summarized for everyone. If you want to know more, please consult our official website.