Construction steps of double wire fence

Construction steps of double wire fence

Double wire fence is a kind of iron fence. This kind of fence is durable, non-eroding, anti-ultraviolet light, and beautiful in design. It is generally used for security protection, land grabbing, both sides of roads, and industrial areas.

The iron mesh fence is durable, non-eroding, anti-ultraviolet light, no environmental pollution, no deformation, beautiful and generous design, bright colors, smooth and meticulous. Installation is simple and convenient. How to install the iron mesh fence?

Installation process of double wire fence:

1. Deep foundation pit engineering construction; the vertical pole deep foundation pit specification conforms to the engineering construction specification, and the pit opening and slope protection are added with embedded parts under the delicate condition, and the access opening is firm and firm. Use box formwork for on-site concrete pouring, the concrete number is not less than c20, the mixing ratio of the various raw materials used for mixing the concrete and the mixing ratio, mixing, concrete pouring, and maintenance should be satisfactory to the relevant specifications.

2. Vertical pole embedded parts; vertical pole embedded parts are terminated in sections, firstly bury the vertical poles on both sides, and then bury the vertical pole in the middle with the hanging wire. The center line of the vertical pole is on the same line, and there is no need to be uneven Phenomenon, in terms of the aspect ratio, the top of the column is stable, the sheet metal is bent outwards, and there must be no high and short tenacious phenomenon. The pole and the column cap should be firmly inseparable from the tail.

3. The pole is buried in the concrete base, and the pole is properly adjusted to firm the pole in a proper direction until the hard bottom of the concrete is interrupted. Install the welded mesh. All steel wire meshes must be tight and stable, and the installation height-width ratio looks neat and beautiful. The installation of the fence net was completed, and the pole was basically terminated and finally settled.

4. In an extraordinary situation, in low and high areas, when the specified land design elevation cannot be stalemate, use two poles to adjust the elevation or use special-shaped steel wire mesh to connect with gradual color. If necessary, terminate the geotechnical test and flatten to obtain a neat surface.

The installation process of most iron mesh fences is the same.